|
About
Documentation
Obtain
Development
Links
|
News archive
- 16 Mar 2011, uClibc 0.9.32-rc3 Release Candidate
Release candidate 3 for 0.9.32 was released today. This release candidate
contains the new C6X port and various fixes and enhancements for about
all arches in several subsystems.
The final release is planned for end of march 2011.
Please test and report back!
Go to the downloads page for the
0.9.32-rc3.
- 20 Jan 2011, uClibc 0.9.32-rc2 Release Candidate
Release candidate 2 for 0.9.32 was released today. This release candidate
contains the generic implementation of protected symbols for all archs
with respect to -rc1.
Go to the downloads page for the
0.9.32-rc2.
- 17 Dec 2010, uClibc 0.9.32-rc1 Release Candidate
Release candidate 1 for 0.9.32 was released today. The final release
is planned for end of january 2011. Please test and report back.
Go to the downloads page for the
0.9.32-rc1.
- 2 Apr 2010, uClibc 0.9.31 Released
0.9.31 has been released. This release contains numerous improvements
over the previous release. Everybody is encouraged to update.
Head to the downloads page to pick up the
0.9.31 release.
- 12 Mar 2010, uClibc 0.9.31-rc1
The first release candidate for the upcoming uClibc-0.9.31 can be
obtained via the downloads page:
0.9.31 release-candidate
1.
Please test and report eventual bugs
.
- 12 Mar 2010, uClibc 0.9.30.3 Released
0.9.30.3 is a bug fix release and a recommended update.
Head to the downloads page to pick up the
0.9.30.3 release.
The
ChangeLog-0.9.30.2_0.9.30.3 indicates all the details.
Enjoy!
- 13 Jan 2010, uClibc 0.9.30.2 Released
0.9.30.2 is a bug fix release and a recommended update.
Also includes AT_FILE interface backported from master.
Head to the downloads page to pick up the
0.9.30.2 release.
The
ChangeLog-0.9.30.1_0.9.30.2 indicates all the details.
Enjoy!
- 5 May 2009, SVN -> GIT
We've migrated from SVN to GIT. SVN is frozen read-only before the
conversion, so check out the Developing links and such for updated
instructions.
- 2 March 2009, uClibc 0.9.30.1 Released
0.9.30.1 has been released. This is a bugfix only release.
Everybody is encouraged to update.
- 12 November 2008, uClibc 0.9.30 Released
0.9.30 has been released. This release contains numerous improvements
over the previous release. Everybody is encouraged to update.
Head to the downloads page to pick up the
0.9.30 release.
- 28 October 2008, uClibc 0.9.30-rc3 Released
0.9.30-rc3 is out of the door. Please test this release candidate to shake out
possible regressions before the final 0.9.30.
Head to the downloads page to pick up the
0.9.30-rc3 release.
- 15 October 2008, uClibc 0.9.30-rc2 Released
After quite some time of bugfixing and general improvement all over the
place we have a 0.9.30-rc2. Please test this release candidate to shake out
possible regressions before the final 0.9.30. Target for the release is
end of october.
Head to the downloads page to pick up the
0.9.30-rc2 release.
- 22 August 2008, Status
Quite some fixes went into trunk during the
last couple of months, umong them fixes for arm, mips, sh, i386, x86_64
and some bits for cris, powerpc and others. Several architecture independent
tweaks and improvements found their way into trunk, too.
A couple of new configuration options were added to allow for even more
fine-grained selection of the desired exported functionality. These new
options are in the "Advanced Library Settings" menu and include
- Realtime-related family of SUSv functions
- Advanced realtime-related family of SUSv functions
- epoll
- Extended Attributes
- a handful of options to turn off compatibility APIs
and deprecated functions
Furthermore it is now possible to build uClibc without networking support
(for certain configurations):
- No network
- Socket
- IPv4
- IPv6
An allnoconfig setup with shared library support is about 30% smaller than
it was previously.
Further work will be needed to completely decouple advanced RT from RT
as well as building a purely IPv6 capable library without any IPv4
support.
- 6 May 2007, uClibc 0.9.29 Released
Smacked down a few more bugs in the malloc implementations for no-MMU and
finally got this one out. Again, this one should be binary compatible with
the 0.9.28 series, but no one has explicitly tested this, so let us know!
Head to the downloads page to pick up the
0.9.29 release.
- 17 April 2007, uClibc 0.9.29_rc1 Released
After the long goodbye, we have 0.9.29_rc1. Post your regressions and we'll
pound out as many before 0.9.29. Target for this is end of the week. After
that, we'll try to continue with the release-early-release-often schedule.
This one should be binary compatible with the 0.9.28 series, but no one has
explicitly tested this, so let us know!
Head to the downloads page to pick up the
0.9.29_rc1 release.
- 28 February 2007, uClibc 0.9.28.3 Released
We're aiming for a new release-early-release-often record or something with
the release of uClibc-0.9.28.3, which fixes a few more problems that turned
up after last week's 0.9.28.2 release -- in particular a problem with weak
threading symbols. As with last week's release, this is intended as a
drop-in replacement for the long-term stable uClibc 0.9.28 release series.
Head to the downloads page to pick up the
0.9.28.3 release.
- 21 February 2007, uClibc 0.9.28.2 Released
We're pleased to announce uClibc-0.9.28.2, with a few more bugfixes
and minor cleanups for tried and true stable 0.9.28 series. As with
uClibc 0.9.28.1, this is intended as a drop-in replacement for the
stable uClibc 0.9.28 release.
Trundle over to the downloads page to pick up the
0.9.28.2 release.
- 28 January 2007, uClibc 0.9.28.1 Released
Take one part uClibc-0.9.28 and many part bugfixes and you we're proud to
announce uClibc-0.9.28.1. What sort of bugfixes you may wonder? The good
kind of course. This marks the new state of development which matches so
many other projects; while heavy development happens on the next major
version, we'll push out some stable point releases.
Trundle over to the downloads page to pick up the
0.9.28.1 release.
- 17 August 2005, uClibc 0.9.28 Released
CodePoet Consulting is pleased to announce the release of uClibc 0.9.28.
You are probably used to this by now, but this release is NOT binary
compatible with uClibc 0.9.27 or any earlier release, so be prepared to
recompile your software if you are still using an old version of uClibc.
Updated uClibc development systems built using uClibc 0.9.28, along
with the uClibc buildroot
and source code used to compile these development systems will be released
later this evening, along with
Linux Test Project test suite
results demonstrating how uClibc is doing. Contributions of LTP test
suite run results using uClibc are welcome...
As usual the
source code for this release
is available here.
- 13 January 2005 -- Bug and Patch Tracking
Bug reports sometimes get lost when posted to the mailing list. The
developers of uClibc are busy people, and have only so much they can keep
in their brains at a time. In my case, I'm lucky if I can remember my own
name, much less a bug report posted last week... To prevent your bug report
from getting lost, if you find a bug in uClibc, please use the
shiny new Bug and Patch Tracking System
to post all the gory details.
The same applies to patches... Regardless of whether your patch
is a bug fix or adds spiffy new features, please post your patch
to the Bug and Patch Tracking System to make certain it is
properly considered.
- 12 January 2005, uClibc 0.9.27 Released
CodePoet Consulting is pleased to announce the release of
uClibc 0.9.27. Release highlights include a new stdio core,
Linux 2.6.x support, a much improved shared library loader,
support for several new architectures, and of course fixes for
the usual pile of bugs.
Due primarily to the stdio changes, this release is NOT binary
compatible with uClibc 0.9.26 or any earlier release, so be
prepared to recompile your software if you are still using an
old version of uClibc. Sorry for the pain...
Updated uClibc development systems using uClibc 0.9.27, along
with the uClibc buildroot and source code used to compile these
development systems, have also been released and are available
from the uclibc.org downloads area.
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 20 April 2004, uClibc 0.9.26 based Debian uwoody
CodePoet Consulting (i.e. Erik) is pleased to announce the immediate
availability of an x86 port of Debian woody compiled with uClibc 0.9.26.
This was originally announced a couple of months ago, but has been updated
a few times since to correct several small problems. If you want an easy
way to start building your own uClibc based applications, this is it. This
even supports building your own packages using 'apt-get', and using
'apt-get' to install already compiled packages from uclibc.org. You can
find Erik's uwoody distribution uwoody distribution here. Assembling
this Debian/uClibc system required a lot of work, so if you
think this is the coolest thing since the invention of water, feel free to
let us know.
- 3 January 2004, uClibc 0.9.26 Released
CodePoet Consulting is sorry to announce there was a pthread bug that
slipped though our extensive testing and was only noticed a few hours after
the previous release. As a result, we are now releasing uClibc 0.9.26
which fixes this bug, and is otherwise identical to the previous release.
This release remains binary compatible with uClibc 0.9.21-25, as long as
you take care to avoid any configuraton changes that will break things.
Please be aware we will break binary compatibilty in the upcoming
0.9.27 release to implement a few necessary changes we have been
postponing. That will hopefully be the last ABI change before we freeze
the ABI for the upcoming 1.0.x stable uClibc series.
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 3 January 2004, uClibc 0.9.25 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.25. This contains many bug fixes and cleanups, and is
recommended for anyone using uClibc. This release remains binary
compatible with uClibc 0.9.21-24 (as long as you take care to avoid any
configuraton changes that will break things). We were planning to break
binary compatibilty in this release, but decided to hold those changes so
we could push out a bugfix release.
Please be aware we will break binary compatibilty in the upcoming
0.9.26 release to implement a few changes we have been postponing. That
will hopefully be the last ABI change before we freeze the ABI for the
upcoming 1.0.x stable uClibc series.
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 19 December 2003, dev systems updated to uClibc 0.9.24
Current uClibc development systems have been posted for
i386,
powerpc,
arm,
mips,
mipsel, and
sh4.
The powerpc dev system mostly works, but there are still some
problems with the shared library loader that have not yet been resolved.
Details on what these are and how to use them can be found in the
FAQ
- 15 December 2003, uClibc 0.9.24 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.24. This contains various minor updates and fixes for a few
silly configuration problems. Arm users should notice a speed increase
since some arm optimized string functions have been added. And several
bugs have been fixed.
This release continues to be binary compatible with uClibc 0.9.21 to 0.9.23
-- as long as you pick compatible configuration options. The next release
will not be binary compatible. We've been saving up a few needed
changes that will be going into the next release, so while you will not
need to recompile all your applications and libraries just yet, keep in
mind we will have a flag day soon...
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 13 November 2003, uClibc 0.9.23 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.23. Of course, we are somewhat less than pleased that there
were configuration problems in the previous release that made such it
necessary to release .23 so quickly. Updated uClibc development systems
using uClibc 0.9.23 are being built and will be posted shortly. And Erik
has built Debian stable (woody) for x86 with uClibc and it runs great.
This release continues to be binary compatible with uClibc 0.9.21 and
0.9.22 -- as long as you pick compatible configuration options. Enabling
or disabling things like soft-float, locale, wide char support, or changing
cpu optimizations are all good examples of binary incompatible
configuration options. If have changed any of those sorts of options (or
if you are not sure!) you will need to recompile all your applications and
libraries.
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 8 November 2003, uClibc 0.9.22 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.22. This release has been cooking for a couple of months now
and is looking quite solid. We have done quite a lot of testing with this
release and things are looking good. And Erik has built Debian stable
(woody) for x86 with uClibc and it runs great. Expect that to be released
in the next few days.
This release is binary compatible with uClibc 0.9.21 -- as long as you pick
compatible configuration options. Enabling or disabling things like
soft-float, locale, wide char support, or changing cpu optimizations are
all good examples of binary incompatible configuration options. If have
changed any of those sorts of options (or if you are not sure!) you will
need to recompile all your applications and libraries.
Updated uClibc development systems using uClibc 0.9.22 will be made
available within a few days. Meanwhile, we invite you to try out uClibc
with the latest Linux Test Project
test suite (you will need to apply a small patch.
And also give the latest Perl and Python test suites a try as well.
If you find any bugs in uClibc, PLEASE let us know!
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 30 September 2003, dev systems updated to uClibc 0.9.21+
The uClibc development systems for
i386,
powerpc,
arm,
mips,
have been updated to uClibc 0.9.21 (plus all the CVS updates up to
today). Several problems have been fixed up,
gcc has been updated to version 3.3.1, binutils was updated to 2.14.90.0.6, and
tada everything finally works for cross compiling. These were
all cross compiled (which really makes things faster since the older
mipsel releases used to take 2 days to build!)
These are ~100 MB ext2 filesystems that run natively on the specified
architecture. They contains all the development software you need to build
your own uClibc applications, including bash, coreutils, findutils,
diffutils, patch, sed, ed, flex, bison, file, gawk, tar, grep gdb, strace,
make, gcc, g++, autoconf, automake, ncurses, zlib, openssl, openssh perl,
and more. And of course, everything is dynamically linked against uClibc.
By using a uClibc only system, you can avoid all the painful
cross-configuration problems that have made using uClibc somewhat painful
in the past. If you want to quickly get started with testing or using
uClibc you should give these images a try. You can loop mount and them
you can chroot into them, you can boot into with using user-mode Linux,
and you can even 'dd' them to a spare partition and use resize2fs to make
them fill the drive. Whatever works for you.
If you would like to build your own custom uClibc system, you can
use buildroot, which is
how these uClibc development systems were created.
- 9 September 2003, uClibc 0.9.21 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.21. This release has been brewing for several months now, and
provides quite a lot of additional functionality and quite a few bug fixes
as well. Many people will be pleased that this release fixes the
"dlopen()'ing libraries that depend on libraries" problem.
The biggest thing in this release (and I do mean that literally) is that
uClibc now has full ANSI/ISO C99 locale support. Well, except for
wcsftime() and collating items in regex, which are not done yet. Adding
support for the default set of locales (169 UTF-8 locales and 144 locales
using other codesets) will enlarge uClibc by around 300k. Still, if you
need locale support, that is still much better than the roughly 30MB the
comparable set of locale date occupies with glibc. And you can of course
reduce the 300k by reducing the number of supported locales.
As usual, this release has many improvements, both large and small. At
this point, most applications that compile and work with glibc will also
compile and run with uClibc. Both Perl and Python pass all the tests in
their test suites (both with and without locale support enabled). We
invite you to grab a copy of the latest Linux Test Project test suite and
give uClibc some abuse. We are not yet perfect, but we are getting pretty
darn close.
This release is not binary compatible with earlier releases. Depending on
your configuration, you may actually still be binary compatible, but it
would be a good idea to recompile your applications when moving to the
uClibc 0.9.21 release. We are sorry about that, but we have never promised
to provide binary compatibility until we hit version 1.0. And even then,
if you change your uClibc configuration, you still still generally need to
recompile...
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
Updated uClibc development systems using uClibc 0.9.21 will be made
available within a few days.
- 30 June 2003, uClibc 0.9.20 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.20. This is primarily a bug-fix release. This release remains
binary compatible with 0.9.18 and 0.9.19 (as long as you leave the
new UCLIBC_HAS_TM_EXTENSIONS option disabled), so you don't have to recompile
everything if you don't really feel like it.
This release has many small improvements. At this point, most applications
that compile and work with glibc will also compile and run with uClibc.
Perl and Python even pass all the tests in their test suites.
There is currently one notable exception. Applications that use dlopen()
to load libraries that themselves depend on other libraries, may have weak
symbols within those depended-upon libraries resolved incorrectly. This
problem is currently being worked on. Other than that, everything seems
to now be working as expected....
As usual, the
Changelog,
detailed changelog,
and source code for this release
are available here.
- 30 June 2003, dev systems updated to uClibc 0.9.20
The uClibc development systems for
i386,
powerpc,
arm,
mips,
have been updated to uClibc 0.9.20. Several problems have been fixed up,
gcc has been updated to version 3.3, and Perl 5.8.0 is now included.
This is a 150 MB ext2 filesystem that runs natively on the specified
architecture. It contains all the development software you need to build
your own uClibc applications, including bash, coreutils, findutils,
diffutils, patch, sed, ed, flex, bison, file, gawk, tar, grep gdb, strace,
make, gcc, g++, autoconf, automake, ncurses, zlib, openssl, openssh perl,
and more. And of course, everything is dynamically linked against uClibc. By
using a uClibc only system, you can avoid all the painful
cross-configuration problems that have made using uClibc somewhat painful
in the past. If you want to quickly get started with testing or using
uClibc you should give these images a try. You can loop mount and then
chroot into them, you can boot into them using user-mode Linux, and you can
even 'dd' them to a spare partition and use resize2fs to make them fill the
drive. Whatever works for you.
If you would like to build your own custom uClibc system, you can
use buildroot, which is
how the uClibc development systems were created.
- 6 March 2003, development system updates
The uClibc development systems for
i386,
powerpc,
arm,
and now for the first time
mips,
have been updated to uClibc 0.9.19. Several smaller problems
have also been fixed up.
This is an ext2 filesystem that runs natively on the specified
architecture. It contains all the development software you need to build
your own uClibc applications, including bash, coreutils, findutils,
diffutils, patch, sed, ed, flex, bison, file, gawk, tar, grep gdb, strace,
make, gcc, g++, autoconf, automake, ncurses, zlib, openssl, openssh and
more. And of course, everything is dynamically linked against uClibc. By
using a uClibc only system, you can avoid all the painful
cross-configuration problems that have made using uClibc somewhat painful
in the past. If you want to quickly get started with testing or using
uClibc you should give these images a try. You can loop mount and
then chroot into them, you can boot into them using user-mode Linux,
you can even 'dd' them to a spare partition and use resize2fs to
make them fill the drive. Whatever works best for you.
Have Fun.
- 3 March 2003, uClibc 0.9.19 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.19. This is once again primarily a bug-fix release. Several
critical problems with system calls were fixed, the pthreads library was
improved, debugging of applications using uClibc's pthreads library is
now possible (requires gdb 5.3 or newer that is compiled using uClibc),
and a number of other random fixes are included. This release retains
binary compatibility with uClibc 0.9.18 (except for mips, which didn't
work properly with uClibc 0.9.18 anyways). Updated development system
images compiled with uClibc 0.9.19 will be released shortly.
As usual, the
Changelog and source code for this release
are available here.
- 17 February 2003, development system updates
The uClibc development systems for
i386
and
powerpc,
and
arm
have been again updated. This time around a few broken symlinks
(one preventing C++ code from compiling) have been fixed, several
system calls related to uids and gid have been fixed, the powerpc
system call mechanism has been updated, and GNU tar and GNU grep
have been added. gcc, gcc+, ssh, etc are all still included and
things remain binary compatible with uClibc 0.9.18.
Have Fun.
- 12 February 2003, development system updates
The uClibc development system has had a number of problems
fixed, and has been updated for uClibc 0.9.18. The
i386
and
powerpc,
and
arm
devel systems are updated and ready to download and use.
Have Fun.
- 12 February 2003, uClibc 0.9.18 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.18. This is primarily a bug-fix release, as there were a few
directory handling problem that could cause application using uClibc 0.9.17
to either segfault or lose the first character when reading directry names.
Unfortunately, once again, this release is _NOT_ binary compatible with
earlier uClibc releases. I _think this will be the last time (with the
possible exception of some future changes to our locale support...)
As usual, the
Changelog
and source code
for this release are available here.
You might want to download uClibc from the closest
kernel.org mirror site.
Just pick the closest mirror site, and then go to
http://www.XX.kernel.org/pub/linux/libs/uclibc/
to download uClibc, where XX is your two letter country code.
- 25 January 2003, uClibc 0.9.17 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.17. The biggest piece of news with this release, thanks to
Manuel Novoa's continuing hard work, is that we now have fully standards
compliant locale support (optional of course). The support works nicely,
(though configuring the locales you wish to support is still manual -- a
task for the next release). Full locale data for over 300 locales adds
approximately 250k. The collation data for all supported locales is
roughly 180k. This may seem rather large to some -- but it is much smaller
than the approximately 40 MB needed by Glibc to provide the same data. And
if you don't need it, you can either disable locale support entirely, or
enable a smaller set of locales.
This release also fixes lots and lots of bugs. The arm
architecture support (I am embarrassed to note) was totally broken in the
last release, but is now working as expected. A security problem (a
buffer overflow in getlogin_r) was fixed. And there were architecture
updates across the board (x86, arm, powerpc, cris, h8300, sparc, and mips).
And of course, this release includes the usual pile of bug fixes. Many
thanks for the large number of patches and fixes that were contributed!
Unfortunately, this release is not binary compatible with earlier uClibc
releases. As noted as item 3 here,
uClibc does not (yet) attempt to
ensure binary compatibility across releases. We will eventually do that
(once we reach the "1.0" release) but not yet. A few bugs turned up that
needed to be fixed, and the only good way to fix them was to change some
fundamental data structure sizes. As a result, this release is _NOT_
binary compatible with earlier releases -- you will need to recompile your
applications. The x86, arm, powerpc, and mips architectures (i.e. the
systems Erik has available in his office for testing) have been tested and
are known to work following this change. Other architectures may
need additional updates. Sorry about that, but it had to be done.
As usual, the
Changelog
and source code
for this release are available here.
You might want to download uClibc from the closest
kernel.org mirror site.
Just pick the closest mirror site, and then go to
http://www.XX.kernel.org/pub/linux/libs/uclibc/
to download uClibc, where XX is your two letter country code.
- 25 January 2003, dev system updates, arm image released
A number of additional problems have been fixed and the arm build
is now, finally, compiling and working as expected. As such,
I have updated the
i386 development system image, the
powerpc development system image, and I am also releasing
upon an unsuspecting world the brand new
arm development system image!
Have fun!
All three development system images were compiled and built using the stock
buildroot system. These were also
built using the (about to be announced in a couple on minutes) uClibc
0.9.17 release, so if you want to begin compiling and testing stuff with
uClibc, but you don't feel like spending the _hours_ it takes to download,
configure, and build your own uClibc based development system -- then you
may want to download these and give them a try. They each contain a 100 MB
ext2 filesystem with everything you need to begin compiling your own
applications. I have (at least minimally) tested each of them and verified
that the included gcc and g++ compilers produce working uClibc linked
executables.
Oh, and I have also have updated the uClibc/gcc toolchain builders, so
if you just want a simple uClibc/gcc toolchain,
one of these should work for you.
- 10 January 2003, dev system updates, powerpc image released
A few problems showed up in yesterday's development system release
(adduser was broken, gdb didn't work, libstdc++ shared libs were missing,
etc). So I've updated the
i386 development system image to fix these problems.
Also, the
powerpc development system image has finally finished compiling
and is now released upon an unsuspecting world. Have fun!
- 9 January 2003, uClibc development system released
CodePoet Consulting (i.e. Erik) has been working hard on buildroot recently, and is pleased to
offer a full stand-alone uClibc-only development system. This is an ext2
filesystem for i386 containing all the development software you need to
build your own uClibc applications. With bash, awk, make, gcc, g++,
autoconf, automake, ncurses, zlib, openssl, openssh, gdb, strace, valgrind,
busybox, GNU coreutils, and more, this should have pretty much everything
you need to get started building your own applications linked against
uClibc. By using a uClibc only system, you can avoid all the painful
cross-configuration problems that have made using uClibc somewhat painful
in the past. A powerpc and an arm version are in progress. Expect them
to be released shortly....
The
uClibc development system is an 18MB bzip2 compressed ext2 filesystem,
so be prepared to wait if you are on a slow link. If you wish to have more
space, you can loop mount it and 'cp -a' the contents to their own
partition, or do what I did... WARNING, the following can be very
dangerous. Please be sure you know what you are doing before trying this.
I am not responsible if you lose all your important data.I had a spare
hard drive (in my case /dev/hdg but you'll want to adapt this to your own
needs), so I partitioned it with a single ext2 partition filling the drive
(in my case /dev/hdg1). Then I ran:
bzcat root_fs_i386.bz2 | dd of=/dev/hdg1
e2fsck -f /dev/hdg1
resize2fs -p /dev/hdg1
which overwrote everything on /dev/hdg with the new uClibc devel system,
and then expanded the filesystem with the uClibc devel system till it
filled the whole drive.
- 8 November 2002, uClibc 0.9.16 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.16. This release adds full support (including a native shared
library loader) for the CRIS architecture, contributed by Tobias Anderberg.
Stefan Allius contributed a number of patches to fix the initialization
order for shared library global constructors and destructors as well as a
large number of SuperH fixes and cleanups. uClibc now compiles with
newer versions of gcc (i.e. RedHat 8.0). Thanks to Christian Michon,
uClibc no longer requires perl to compile. Steven J. Hill fixed dlopen for
mips. Several problems with pty and tty handling were fixed. Manuel Novoa
added new support for an /etc/TZ file to globally set the system timezone,
and fixed up a number of remaining wide char issues. Manuel is still hard
at work on bringing full locale support (optional of course) to uClibc.
And of course, this release includes the usual pile of bug fixes. Many thanks
for the large number of patches and fixes that were contributed!
Erik and Manuel have been working on a
document describing some of the differences between uClibc and glibc.
It's not yet 100% complete, and it hasn't been nicely formatted yet. But
it contains a lot of helpful information and is worth a look.
And finally, the the old uClibc configuration system has been completely
removed (and there was much rejoicing). It was replaced with an entirely
new system based on LinuxKernelConf,
which has since been included into Linux 2.5.45, so it looks like Erik made
the right choice. Of course, those who have existing build systems using uClibc
will need to make a few changes... We think the change is worth it.
As usual, the
Changelog
and source code
for this release are available here.
You might want to download uClibc from the closest
kernel.org mirror site.
Just pick the closest mirror site, and then go to
http://www.XX.kernel.org/pub/linux/libs/uclibc/
to download uClibc, where XX is your two letter country code.
Updated gcc-3.2 and gcc-2.95 toolchains will be released shortly.
- 16 September 2002, gcc-3.2 and gcc-2.95 toolchains released
CodePoet Consulting (i.e. Erik) has released updated gcc-3.2 and gcc-2.95
uClibc toolchains. These toolchains build real gcc cross compilers (i.e.
not just a wrapper) and create executables linked vs uClibc. The new
gcc-3.2 provides uClibc support with the latest and greatest compiler
available from the gcc team. The gcc-2.95 toolchain has been updated to
the latest version of uClibc and now provides full C++ support, using the
STLport standard C++ library.
This toolchain should make it easy for anyone to build uClibc based
applications.
Source code can be downloaded here.
Be aware that much of the needed source code will actually be downloaded on
when you compile the toolchains. To build a toolchain, simply
grab the source, edit the Makefile to select where you would like
the toolchain installed, run 'make', and then go watch TV, eat
dinner, or visit with your friends while it compiles. It takes
about 15 minutes for Erik to compile the gcc-3.2 toolchain (w/C++ support)
on his Athlon XP 1600 (not counting the time it takes to download
source code).
- 27 August 2002, uClibc 0.9.15 Released
CodePoet Consulting is pleased to announce the immediate availability
of uClibc 0.9.15. This release fixes a number of problems that turned
up since the last release. The good news is that uClibc now
passes all tests in the perl 5.8 and Python 2.2.1 test suites, both with
and without pthreads. So without any further ado....
The
Changelog
and source code
for this release are available here.
Have fun!
- 12 August 2002, uClibc 0.9.14 Released
CodePoet Consulting is slightly less pleased then usual to announce the
immediate availability of uClibc 0.9.14. This is, unfortunately, a bugfix
release intended to fix the couple of dumb things that slipped into the
previous release. Version 0.9.13 of uClibc would fail to compile when
enabling both RPC and Pthreads. There was also a problem with RPC thread
local storage (but noone noticed since it didn't compile ;-). Also, the
thread locking in exit(), onexit() and atexit() was broken, and wasn't
actually locking anything. This release also fixes uClibc's gcc wrapper
to use crtbeginS.o and crtendS.o when compiling PIC code, fixing a subtle
bug (that was much less subtle on powerpc). Finally, this release includes a
few minor compile warning cleanups.
The
Changelog
and source code
for this release are available here.
Have fun!
- 12 August 2002, Native uClibc/gcc-3.1.1 toolchain released
CodePoet Consulting (i.e. Erik) has released an updated native
uClibc/gcc-3.1.1 toolchain. This toolchain builds a real gcc cross
compiler (i.e. not just a wrapper) and creates executables linked vs
uClibc. This toolchain has been (briefly) tested as working on x86, arm,
mips, and arm7tdmi (uClinux). This toolchain provides a number of
improvements over previous releases. In particular, Steven J. Hill found
and fixes a number of "glibc-isms" in the libstdc++ math support which
caused a number of math functions to be mapped to the non-standard named
under GNU libc. This release also includes greatly improved uClinux
"elf2flt" support, and it now produces working flat binaries for my
uClinux/arm7tdmi system. The native uClibc/gcc-2.95 toolchain will be
updated in a few days, and will include STLport which will allow that
toolchain to also provide full C++ support.
This toolchain should make it easy for anyone to build uClibc based
applications.
Source code can be downloaded here.
Be aware that much of the needed source code will actually be downloaded on
demand when you compile things. To build the toolchain, simply
grab the source, edit the Makefile to select where you would like
the toolchain installed, run 'make', and then go watch TV, eat
dinner, or visit with your friends while it compiles. It takes
about 15 minutes for Erik to compile the gcc-3.1.1 toolchain (w/C++ support)
on his Athlon XP 1600 (not counting the time it takes to download
source code). Your results may vary...
- 9 August 2002, uClibc now mirrored on kernel.org!
uClibc is now available from the kernel.org mirrors! This should make
uClibc downloads much faster. The kernel.org mirrors will have all
uClibc release versions (everything but the daily snapshots).
Here is a list of all the kernel.org mirror sites.
Just pick the closest mirror site, and then go to "/pub/linux/libs/uclibc/"
to download uClibc.
Just pick the closest mirror site, and then go to
http://www.XX.kernel.org/pub/linux/libs/uclibc/ to download the latest
uClibc release from a nice fast system.
- 9 August 2002, uClibc 0.9.13 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.13. After several days of testing, this release is looking very
solid. This release fixes three security vulnerabilites in previous
releases. There was an off-by-one buffer overflow in the group handling
code, and integer overflows in calloc() and xdr_array().
This release adds native shared library support for the Hitachi
SuperH architecture, thanks to Stefan Allius and Edie C. Dost. A
new mmap based malloc was implemented by Miles Bader. This is much
smarter than the old "malloc-simple" and is now the default for
mmu-less systems, where it should greatly help reduce memory
fragmentation and wastage. In addition to these larger items, there
has been a lot of work done to make uClibc a cleaner, more
capable, library. Most applications now compile and run without
any trouble.
The
Changelog
and source code
for this release are available here.
Have fun!
- 11 July 2002, Native uClibc toolchains updated
CodePoet Consulting (i.e. Erik) has released updated native
uClibc/gcc-3.1 and uClibc/gcc-2.95 toolchains. These toolchains
build real gcc cross compilers (i.e. not just a wrapper) and create
executables linked vs uClibc. These toolchains have been tested
and found working on x86, arm, and mmu-less arm. They should work
(at least in theory!) for all architectures supported by uClibc.
These toolchains should make it easy to anyone to build uClibc based
applications.
Source code can be downloaded here.
Be aware that much of the needed source code will actually be downloaded on
demand when you compile things. To build the toolchain, simply
grab the source, edit the Makefile to select where you would like
the toolchain installed, run 'make', and then go watch TV, eat
dinner, or visit with your friends while it compiles. It takes
about 15 minutes for Erik to compile the gcc-3.1 toolchain (w/C++ support)
on his Athlon XP 1600 (not counting the time it takes to download
source code). Your results may vary...
- 20 June 2002, uClibc 0.9.12 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.12. This release adds an i960 port, an initial alpha port,
fully working mips shared library support, shared library support fixes
for on powerpc, and many other improvements. One very exciting new feature
is nearly complete locale support, thanks to a lot of hard work by Manuel
Novoa III. uClibc's locale support is much smaller than glibc's,
though it is also slightly less flexible. This release was delayed by a
month due to the arrival of a new baby at Erik's house. For those that
have been anxiously waiting, this release should certainly be worth the
wait. Have fun!
The Changelog
and source code
for this release are available here.
- 28 May 2002, Native uClibc/gcc-3.1 toolchain
CodePoet Consulting has released source code and a Makefile to build a
gcc-3.1 toolchain that natively targets uClibc. Additionally, the
gcc-3.0.4 and gcc-2.95 toolchains have also been updated. These toolchains
make it easy to build uClibc based applications.
Source code can be downloaded here.
and is now much smaller,
since much of the needed binutils and gcc source code is now downloaded on
demand. To build the toolchain, simply grab the source, edit the Makefile
to select where you would like the toolchain installed, and then run 'make'
and wait for it to compile.
- 10 April 2002, uClibc 0.9.11 Released
CodePoet Consulting is pleased to announce the immediate availability of
uClibc 0.9.11. This release is primarily focused on fixing the issues that
have turned up since the last release. Several bugs in the gcc wrapper
have been fixed, allowing applications such as iproute2 and XFree86 to link properly.
Large file support has been improved, and a thread locking bug was
fixed that could cause s*printf calls to deadlock when threading was
enabled. Several bugs were also fixed with the powerpc, h8300, m68k,
sparc, and mips architecture support. Many additional applications now
compile and run perfectly and have been added to the working applications list .
The Changelog
and source code
for this release are available here.
- 10 April 2002, Native uClibc/gcc-3.0.4 toolchain
CodePoet Consulting has released source code and a Makefile
to build a gcc-3.0.4 toolchain that natively targets uClibc.
This brings with it full C++ support for uClibc, including the
libstdc++ library. A gcc-2.95.x toolchain will also be released
shortly, but is not yet ready. At this time, only source code and
a Makefile for the native uClibc toolchain is being released (i.e.
no binaries, sorry).
Source code can be downloaded here.
To build the toolchain, simply grab the source, edit the Makefile
to select where you would like the toolchain installed. Then
run 'make' and wait for it to compile. If you do not have a copy
of uClibc already, it will download the latest daily snapshot.
- 21 March 2002, uClibc 0.9.10 Released!
CodePoet Consulting is pleased to announce the immediate
availability of uClibc 0.9.10. This release adds pthreads support
(including pthreads support for mmu-less systems!). Additionally,
thanks to Manuel Novoa III, we now have a completely new stdio
library, which is small, standards compliant, supports pthreads,
wide/narrow streams, large files, and can even operate in a
low-memory unbuffered mode. Many, many bugs have been fixed and a
number of additional applications now compile and run perfectly.
Even with all these changes, uClibc continues to be very small.
On x86, a default build of the uClibc C library is still just 168k.
To make things more interesting, the release also adds support for
C++ constructors and destructors. To make it easy to use uClibc
when developing C++ applications, this release also provides a
wrapper for the GNU C++ compiler. Of course, for more complex C++
applications, such as those using iostreams, a standard C++ library
(libstdc++) is required. A native GNU toolchain (binutils/gcc) that
provides libstdc++ linked with uClibc 0.9.10 will be released in the
next couple of days, so stay tuned.
The Changelog
and Source code
for this release are available here.
- 4 February 2002, uClibc 0.9.9 Released!
CodePoet Consulting is pleased to announce the immediate
availability of uClibc 0.9.9. With this release,
just about
everything we have tested now compiles and runs. In fact,
there are now so many programs on the working application list that
rather than continue to add to this list, from now on we
will only be adding applications to the not working list. Most applications
on the not working list either require pthreads, or require
wide-character support. Work on wide-character support is
well underway, and will hopefully be moving into CVS in the next week or
two. Full pthreads support and rentrancy are on the TODO list
and are expected to be complete in the next couple of months.
The Changelog
and Source code
for this release are available here.
One final bit on news -- as some of you may have noticed, uclibc.org
has been a bit overloaded and somewhat slow recently. The server should
be getting colocated tomorrow, which will eliminate the speed problem.
During the move, there may be some temporary disruption of service...
Have Fun!
- 22 December 2001, uClibc 0.9.8 Released!
After many months of initial development, we are pleased to announce the
release of uClibc 0.9.8. This release should be quite solid, and is very
usable. This also, hopefully, marks a transition from a slow incubation
phase to a more methodical release cycle. From now one, there should be
approximately one release per month.
The source code for this release is available
here.
- 26 November 2001, powerpc shared libraries fully working
Dave Schleef finished off the the work needed for shared library support on
powerpc. There had been a few problems remaining, and those are now squashed.
So shared libs on powerpc should be working fully now.
- 14 November 2001, m68 compiles again, Large file support working
About a month ago I synced the header files with glibc 2.2.4 for better
C++ support and better standards compliance. I forgot to sync up m68k,
sparc, powerpc, and mipsel. Dave Schleef fixed powerpc while he was fixing
up the shared lib loader. I just fixed up m68k, sparc, and mipsel so they
should all compile again.
I also finished up fixing large file support (just enable DOLFS in your
Config file to enable it) and it is working just great, and greatly increases
the number of glibc applications that will work "out-of-the-tarball" without
needing any changes.
- 12 November 2001, powerpc shared lib support
Thanks to David Schleef, uClibc now has full shared library support
on powerpc. This brings full shared library support to x86, ARM, and
now powerpc. Thanks Dave!
- 7 November 2001, uClibc application list
uClibc now has a list of applications
that are known to work. If you have any applications to add to the
list, submissions are welcome!
- 18 October 2001, buildroot uClibc example system
Those wanting an easy way to test out uClibc and give it
a test drive can download and compile
buildroot.
This is a nifty buildsystem that will automagically download and build
a User-Mode Linux
kernel, and will then download source for and compile up a fully
working uClibc based root filesystem. This should make it easy for
people to create their own projects. I hope that this build system
will allow people to more easily use and build uClibc based systems.
As an example of how nicely this works, the
Tuxscreen Project is using a
slightly adjusted variant of the buildroot system to cross
compile the blob bootloader, linux kernel, and a uClibc based jffs2
root filesystem (busybox, tinylogin, udhcp, lrzsz, pcmcia-cs and
microwindows) for ARM. Pretty cool.
- 11 October 2001, v850 architecture support
Miles Bader has contributed support for the v850 architecture.
- 25 Spetember 2001, header files updated
uClibc's header files are now in sync with glibc 2.2.4,
allowing better standards compliance, better portibility, and
better C++ support.
- 4 July 2001, ARM shared library support
uClibc now has full shared library support on ARM.
- 9 May 2001, libm added
uClibc now has a very complete math library.
- 9 May 2001, ld.so added
uClibc now has a native ld.so. It currently is only ported to work on x86,
but porting to other architectures should not be too difficult.
- 15 March 2001, powerpc port added
David Schleef contributed a powerpc port, which is now in CVS.
- 19 February 2001, SH port added
Jean-Yves Avenard contributed an SH port. See his email
with the initial patch here.
- 16 January 2001, uClibc as a shared library
As if January 16, uClibc can now be used (at least on x86) as a shared
library. See the email
announcing this achievement.
- 11 January 2001, gcc wrapper added
Manuel Novoa III has created a wrapper for gcc that makes compiling apps vs uClibc
as simple as just setting "CC" to gcc-uclibc-<arch>. This even works when cross
compiling! Very cool.
- 3 January 2001, uClibc now has a web page
A lot of work has been going on under the hood with uClibc,
so I decided to put together this webpage to let the world know
that it exists and is getting to be usable.
|
